| Back to Contents Page |
Using Your Projector: Dell™ 3300MP Projector
|
 Control
Panel
Remote Control
On-Screen Display
|
Control Panel
|
|
Power
|
| See "Powering On/Off the
Projector." |
|
Volume
|
| Increase or decrease the speaker volume. |
|
Color Mode
|
| Switch the display mode within PC Mode,
Movie Mode, Game Mode, sRGB Mode, User Mode per your preference. |
Source |
Press  to step through Analog RGB, Composite, Component-i, S-video,
and Analog YPbPr sources, and photo image from the card reader (Optional
accessory) when multiple sources are connected to the projector. |
R-sync |
Press  to synchronize the projector to the input source.
R-sync will not operate if the OSD (On-Screen
Display) is displayed. |
|
Menu
|
Press 
to activate the OSD. Use the directional keys and Menu
button to navigate through the OSD. |
Four Directional Keys |
The four directional keys     can be used to toggle through the tabs
in the OSD. |
Keystone Adjustment |
Press 
or 
button to adjust image distortion caused by tilting the projector. (±
9 degrees) |
|
Remote Control
|
 
|
| 1 |
Directional pad |
| 2 |
Enter button |
| 3 |
Laser radiation caution |
|
Power |
| See "Power On/Off the Projector." |
Source |
| Press the Source
button to switch between Analog RGB, Digital RGB, Composite, Component-i,
S-video, Analog YPbPr sources, and the card reader (Optional accessory). |
|
Freeze
|
| Press the Freeze button to temporarily
stop motion video. Press the button again to resume. |
| Mute |
| Press the Mute button to mute or un-mute the projector
speaker. |
|
Slide Show (Enabled only when projection with the photo images
from the optional card reader)
|
| Press the Slide Show button to display all the photo
images in the memory card one by one. |
|
Pre-view (Enabled only when projecting photo images from the optional
card reader)
|
| Press the Pre-view button to browse thumbnails of all
the photo image files. |
| Normal (Enabled only when
projecting photo images from the optional card reader) |
| Press the Normal button
to display the photo images one by one manually controlled by PU
or PD button. |
|
Rotate (Enabled only when projecting photo images from the optional
card reader)
|
| Press the Rotate button to rotate the image on the
screen. |
R-sync |
Press R-sync to synchronize the projector
to the input source.
R-sync will not operate if the OSD (On-Screen
Display) is displayed. |
Directional Pad |
| The directional pad can be used to
control mouse movement when the remote control cover is closed. The mouse
function is enabled using the USB connector on the M1-A to combination VGA
and USB cable between your computer and the projector. The directional pad
will control the OSD (On-Screen Display) when the cover is open. |
Hide |
| Press Hide button to hide the image, press
again to resume display of the image. |
Color Mode |
| The Dell 3300MP Micro-projector has preset configurations
that are optimized for displaying data (PC Graphics) or video (movies, games,
etc.). Press Color Mode button to toggle between PC mode,
Movie mode, Game Mode, sRGB, or User mode (for user
to setup and save preferred settings). Pressing the Color Mode button
once will show the current display mode. Pressing the Color Mode
button again will switch between modes. |
PU (Page UP) |
| Press the PU button to step to previous page.
|
PD (Page Down) |
| Press the PD button to step
to next page. |
Menu |
| Press the Menu button to activate
the OSD. Use the directional keys and Menu
button to navigate through the OSD. |
| 4:3/16:9 |
| Press 4:3/16:9 button to switch aspect ratio 1:1, 16:9,
4:3 as described below. |
Volume +/- |
| Press the Vol+
button to increase the volume, press the Vol- button to reduce the
volume. |
| Keystone |
| Press the button to adjust the
image distortion caused by tilting the projection AUTOMATICALLY,
press Keystone again to off the auto keystone function. (±
9 degrees) |
|
Laser
|
| Aim the remote control at the screen, and press and hold the
Laser button to activate the laser light. |
On-Screen Display
|
- The projector has a multi-language On-Screen Display (OSD) that can
be displayed with or without an input source present.
|
- The OSD allows you to make image adjustments and change a variety
of settings. If the source is a computer, the OSD allows changes to
the Computer Image tab. When using a video
source, the OSD allows changes to the Video Image
tab. The projector automatically detects the source.
|
- When the OSD is on the screen, press or
to navigate through the OSD tabs.
Example: All Images--> Computer Image--> Audio--> Management-->
Language--> Factory Reset. To make a selection in a tab, press
on keypad or "Menu" on remote controller.
|
- Press or
to make a selection and adjust the
settings by pressing
or on keypad or
Left and Right button on the remote controller. When an item is selected,
the color of the item will change to dark gray.
|
- To exit the OSD, go to "Exit" tab and press
button on keypad or "Menu" on remote controller.
All Images Menu
|
|
|
-
|
|
|
|
|
-
|
Color Temp. |
|
Adjust the color temperature. With the higher temperature, the
screen looks more blue; with the lower temperature, the screen looks
more red. User mode activates the values in the "color setting"
menu.
|
|
-
|
Color Setting |
|
This mode allows for manual adjustment of red, green, and blue
color settings. Modifying these values will automatically change
the color temperature to "user".
|
|
-
|
Auto Keystone |
|
- Select Yes to enable the auto correction for vertical
image distortion due to tilting the projector.
- Select No and press Menu button on remote
control or control panel will go to Keystone menu for correction
the image distortion manually.
|
|
-
|
Aspect Ratio |
|
Select this function to fit 1:1, 16:9 or 4:3 aspect ratio. In order
to use the 1:1 aspect ratio, the input must be a computer signal
(through VGA cable) less than XGA (1024 x 768), component 576p/
480i / 480p, S-Video, or Video (composite). If the input signal
is a computer signal greater than XGA or component 1080i / 720p,
only 16:9 or 4:3 aspect ratio will be available. When an icon is
selected, the color of the icon will change to dark blue.
1:1: The input source will be displayed without scaling.
16:9: The input source will be displayed in wide screen
mode (16:9). The source will be scaled to fit the width of the screen.
4:3: The input source will be scaled to fit the screen.
|
|
-
|
Color Mode |
|
Select this function to optimize the display image for home use
(Movie Mode or Game Mode), conference use (PC Mode)
or as user preferable settings (User Mode), or use sRGB
mode for more accurate color representation. When an icon is selected,
the color of the icon will change to dark blue. Adjusting the settings
of White Intensity or Degamma tab, will select
User Mode automatically.
|
|
-
|
White Intensity |
|
White Intensity can be adjusted between
0 and 10. |
|
- Setting 10 will maximize the brightness.
- Setting 0 will maximize color reproduction quality.
|
|
|
Degamma |
|
Degamma can be adjusted between 1 and 4. Default setting
is 3 (Recommended). Adjustment of the setting will change the
color performance of the display.
|
|
|
Audio Menu
|
|
|
|
|
| Audio |
-
|
Volume |
|
- Press
to decrease the volume.
- Press
to increase the volume.
|
|
-
|
Treble |
|
Control the higher frequencies of your audio source. |
|
- Press
to decrease the treble.
- Press
to increase the treble.
|
|
-
|
Bass |
|
Control the lower frequencies of your audio source. |
|
- Press
to decrease the bass.
- Press
to increase the bass.
|
|
-
|
Mute |
|
- Select the left icon to mute the volume.
- Select the right icon to un-mute the volume.
|
|
|
Management Menu
|
|
|
|
|
| Management |
-
|
Menu Location |
|
Select the location of the OSD on the screen.
|
|
|
|
-
|
Signal Type |
|
Manually select signal type RGB, YCbCr, YPbPr.
|
|
-
|
Lamp Hour |
|
Display operating hours since lamp timer reset.
|
|
-
|
Lamp Reset |
|
Use this function only after a new lamp is installed in the projector.
Select the left Lamp Reset icon (light bulb and
arrow under the icon), and press the Enter button
to reset the lamp timer.
|
|
|
Power Saving Menu
|
|
|
| Power Saving |
|
Use this function to select the power saving delay period.
Press "Yes" to go into the "set time" sub menu. |
|
-
|
Set Time (Min) |
|
Set the power saving delay period as you prefer. When the projector
is not receiving an input signal for the selected period of time,
the projector will automatically enter power saving mode, and turn
off the lamp. After a one-minute cooling period, the projector will
turn back on with detection of an input signal or by pressing the
"Power" button. After two hours the projector will turn
off and must be turned on by pressing the power button on the control
panel or remote.
|
|
-
|
Eco Mode |
|
- Select On to operate the projector in lower power (156
Watt) for providing longer lamp life and quiter operation with
dimmer luminance output on the screen.
- Select Off to resume the operation in normal power (180
Watt).
|
|
-
|
Auto Source |
|
The projector will always automatically search for available input
signals when Auto Source is On, which is the default
setting. Press the Source button with Auto Source
On to automatically search for the next available input signal.
Selecting Off will lock on the current input source. Set
Auto-Source to Off to step through the different input
signals manually.
|
|
|
Language Menu
|
|
|
| Language |
-
|
Language |
|
Press
or to select the preferred
language. |
|
|
Card Reader Module Menu
|
|
|
| Card Reader Module - Note: this menu is only
available when the card reader is installed. (Card Reader is an optional
accessory that can be purchased from Dell website) |
| Card Reader Module |
-
|
Render Mode |
|
Use Render Mode function to change Normal, Pre-view
or Slide Show mode, select Change to go into the sub-menu.
|
|
-
|
Mode Rotation (Available in Normal mode
only) |
|
Use Mode Rotation to rotate the projection image.
|
|
-
|
Transition Mode (Available at Normal,
Pre-view and Slide Show modes) |
|
Use Transition Mode to setup the preferred transition pattern
for the image.
|
|
-
|
Slide Time (Available at Normal,
Pre-view and Slide Show modes) |
|
Adjust the slide time interval during Slide Show.
|
|
-
|
Display Mode (Available at Normal
mode only) |
|
- Select True to display the photo image in native resolution.
- Select Full to scale the photo image to full screen.
|
|
-
|
Photo Information (Available at Normal,
Pre-view and Slide Show modes) |
|
- Select Yes to show the photo information on the screen.
- Select No to hide the photo information.
|
|
-
|
Delete Photo (Available at
Normal mode only) |
|
Select Yes to delete the photo image projected on the screen.
|
|
-
|
Color (Available at Normal,
Pre-view and Slide Show modes) |
|
- Select On to display the photo image in color mode.
- Select Off to display the photo image in black-and-white
mode.
|
|
-
|
Diagnostic |
|
- Select On to run the Diagnostic test on the card
reader.
- Select Off to exit the test.
Note: Please refer to the installation guide of the card reader
for details.
|
|
|
Factory Reset Menu
|
|
|
|
|
-
|
Factory Reset |
|
Select Yes to reset the
projector to its factory default settings. Reset items include both
computer image and video image settings. |
|
|
Computer Image Menu
|
|
|
| Computer Image- Note: this menu is only available
with a computer input signal connected. |
-
|
Frequency |
|
Change the display data clock frequency to match the frequency
of your computer graphics card. If you see a vertical flickering
bar, use the frequency control to minimize the bars. This is a coarse
adjustment.
|
|
-
|
Tracking |
|
Synchronize the phase of the signal of the display with that of
the graphic card. If you experience an unstable or flickering image,
use the Tracking function to correct it. This is a fine adjustment.
NOTE: Adjust the Frequency first and then the Tracking.
|
|
|
|
|
|
|
Video Image Menu
|
|
|
|
|
| Video Image- Note: this menu is only available
with S-video, Video (composite) signal connected. |
-
|
Saturation |
|
Adjust a video image from black and white to fully saturated color.
- Press
to decrease the amount of color in the image.
- Press
to increase the amount of color in the image.
|
|
-
|
Sharpness |
|
Adjust the sharpness of the image.
- Press
to decrease the sharpness.
- Press
to increase the sharpness.
|
|
-
|
Tint |
|
Adjust the color balance of red and green.
- Press
to increase the amount of green in the image.
- Press
to increase the amount of red in the image.
|
|
Back to Contents Page
|
Front Projection-Desktop 
Rear Projection-Desktop
Front Projection-Ceiling Mount
Rear Projection-Ceiling Mount
