Technical Specifications: Altec Lansing ADA995 User's Guide
Back to Contents Page
Technical Specifications: Altec Lansing ADA995 User's Guide
Specifications | Front, Rear, & Center Satellite Speaker
Specifications | Subwoofer
Specifications
Manufacturer:
Altec Lansing Technologies, Inc.
Model:
ADA995
System Frequency Response:
38 Hz to 20 kHz
System Acoustic Output:
> 105 dB SPL at 28 inches
System Signal-to-Noise (S/N) Ratio:
> 75 dB A-weighted�
Total Amplifier Power Rating:
> 200 watts continuous average power (all speakers operating)
at < 1% (THD+N), 63 Hz and 1 kHz (per EIA Standard RS-490)
Input Sensitivity for Rated Output:
200 mV rms
Input Impedance (any line input):
> 10 kΩ
Maximum Input Signal Voltage:
2 V rms
Input Cables:
Attached, color coded 3.5 mm stereo plugs
Power Requirements:
120 Vac ±10%, 60 Hz ±3 Hz, 400 Watts
Power Cord Length
2 m (6 ft)
Operating Temperature Range:
0 °C to 50 °C
Humidity, Non-condensing:
95% RH @ 50 °C
Configuration:
2-way, one woofer and one tweeter, magnetically shielded
Woofer Size:
76.2 mm (3") full range driver
Woofer Impedance:
8
Ω
Tweeter Size:
32 mm (1.25")
Frequency Response:
150 Hz to 20 kHz
Output Power per Channel:
> 21 watts continuous average power @ < 1% (THD+N), each
front and rear channel
Dimensions:
51.2 cu in inside volume
Weight:
1.5 lb (0.6 kg)
Color:
Dell Midnight Gray with Dell Ion accents�
Speaker cables :
Length:
3m (10 ft), Front and center speakers
Connectors:
RCA phono connectors, color-coded and mechanically keyed
Number of speakers:
Two (2)
Woofer Size:
(170) mm (6.5") long throw driver
Woofer Impedance:
8
Ω
Enclosure type:
Ported, rigid wood construction
Frequency Response:
38 Hz to 150 Hz
Output Power:
> 94 watts continuous average power @ < 1% (THD+N)
Dimensions:
17.7x8.2x17.3 (450x209.5x440 mm) outside dimensions
Weight:
36.5 lbs (16.6 kg)
Color:
Midnight Gray
Please read all restrictions and
disclaimers .
Back To Contents Page
