User Guide

User Guide
Jumpers Prior To the Introduction of the 150c and 166c: Dell Dimension� XPS P90c/P100c/P120c/P133c/P150c/P166c

Jumpers Prior To the Introduction of the 150c and 166c: Dell Dimension XPS P90c/P100c/P120c/P133c


00000026.gif

A (CPU CLK)
B
00000028.gif Microprocessor's external speed is 50 MHz
A
B
00000029.gif Microprocessor's external speed is 60 MHz
A
B
00000030.gif Microprocessor's external speed is 66 MHz

 

C (FREQ) 00000032.gif Microprocessor's internal speed is 1.5 times its external speed.
  00000033.gif Microprocessor's internal speed is 2.0 times its external speed.

 

D (SETUP) 00000035.gif (default) Allows the user to enter the system setup program.
  00000036.gif Prevents the user from entering the system setup program.

 

E (CLEAR CMOS) 00000038.gif (default) System setup settings are retained at next system boot.
  00000039.gif System setup settings are cleared at next system boot.

F (PASSWORD) 00000041.gif (default) Password feature is enabled.
  00000042.gif Password feature is disabled.

G (FLASH) 00000044.gif (default) Reserved. Do not change.

H (VOLTAGE) 00000046.gif Selects voltage required for a 100- or 120-MHz Pentium processor.
  00000047.gif Reserved.

SPKR 00000049.gif (default) Enables the systems built-in speaker.
  00000050.gif Disables the systems built-in speaker.
   

Laptops | Desktops | Business Laptops | Business Desktops | Workstations | Servers | Storage | Monitors | Printers | Electronics
All rights reserved : About Dell | Site Terms | Terms and Conditions | Unresolved Issues | Privacy | Returns Policy | Site Map | Dell Recycling | Feedback

* DELL'S TERMS AND CONDITIONS: All sales subject to Dell's terms and conditions. You can find them by clicking on "Terms and Conditions of Sale" located at the bottom of our website, www.dell.com.au OR on request.

snWEB3