If you have VESA's compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as
Power Save Mode*. If the computer detects input from keyboard, mouse, or other input devices,
the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation and USB active
Active
Active
Active
White
75 W (maximum)
Normal operation
Active
Active
Active
White
65 W (typical)
Active-off mode
Inactive
Inactive
Blanked
Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W
NOTE: The OSD functions in the 'Normal operation' mode. One
of the following messages appears when the menu key is
touched in Active-off mode.
or
Activate the computer and 'wake up' the monitor to gain access to the
OSD.
Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
This section gives you information about the USB ports that are available on
the left side of your monitor.
NOTE:This monitor supports High-Speed Certified USB 2.0 interface
Transfer speed
Data Rate
Power Consumption
High speed
480 Mbps
2.5W (Max., each port)
Full speed
12 Mbps
2.5W (Max., each port)
Low speed
1.5 Mbps
2.5W (Max., each port)
USB Upstream Connector
Pin Number
4-pin Side of the connector
1
DMU
2
VCC
3
DPU
4
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
USB Ports
1 upstream - back
4 downstream - 2 on back; 2 on left side
NOTE: USB 2.0 functionality requires
a USB 2.0-capable
computer
NOTE: The
monitor's USB interface works only when the monitor is on or in power save mode.
If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality.
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC)
protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings if desired. For more information about changing the monitor
settings, see Operating the Monitor.
The integrated USB camera and
analog microphones allow you to take pictures, videos, and communicate with
other computer users. The camera is located at the top of the monitor and is
fixed. However, the camera’s software--Dell
Webcam Software suite, provides limited panning abilities. When the
camera is on, the white light next to the camera turns on.
Lens
Field of view
66.5 degree +/- 5 %
Focus mode
Fixed Focus
Focus area
49 cm~Infinity
Focusing distance (normal mode)
1.100 mm
Image Sensor
Active array size
2.0 mega-pixel
Video specification
Video frame rate
1600 x 1200 (UXGA) - up to 10 frames per second
640 x 480 (VGA) and below - up to 30 frames per second
Image flip
Horizontally
Digital zoom
2x
Audio Specification
Microphone type
Dual Microphone
Interface
USB 2.0 high Speed
Power Supply
3.3 volts +/- 5%
System
Requirements
The following are the minimum system requirements for the Dell Webcam Software Suite:
Intel® Pentium® 4 or AMD® equivalent processor running at 2.4 GHz or higher
(Recommended: Intel Pentium Core 2 Duo E4300 or AMD equivalent processor running at 2.8 GHz with Hyper-Threading enabled)
Microsoft® Windows® XP Service Pack 3, Windows Vista or Windows® 7.
1 GB RAM (2 GB RAM or higher recommended)
580 MB free hard disk space
Available USB 2.0 port or a USB 2.0 hub with external power supply
Dell Webcam Software Suite
The Dell Webcam Software Suite includes the following applications:
Dell Webcam Centre
Dell Webcam Central enables convenient access to all exciting applications to enhance your Dell Webcam experience.
Creative Live! Cam Avatar Creator
Creative Live! Cam Avatar Creator lets you personalize an animated avatar from any digital photo you want. Using advanced speech technology, your personalized avatar even lip syncs with you. Share creation with friends using Live! Cam Avatar, via email or even YouTube™.
* SP2309W color gamut (typical) is based on CIE1976 (98%) and CIE1931 (92%) test standards, but this 92% color gamut does not fully overlap NTSC Value.
Analog RGB, 0.7 Volts +/- 5%, positive polarity
at 75 ohm input impedance
Digital DVI-D TMDS, HDMI, 600mV for each differential line, positive polarity at
50 ohm input impedance
Audio Input and Output signals
Input signal level: 1Vrms without chipping
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)
CAUTION: Read and follow the safety
instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor
power cable from the electrical outlet.
For best practices, follow the instructions in the list below while
unpacking, cleaning, or handling your monitor:
To clean your antistatic screen, lightly dampen a soft, clean cloth with
water. If possible, use a special screen-cleaning tissue or solution
suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
air.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any
kind as some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with
a cloth.
Handle your monitor with care as a dark-colored monitor may scratch and
show white scuff marks more than a
light-colored monitor.
To help maintain the best image quality on your monitor,
use a dynamically changing screen saver and turn a off your monitor
when not in use.
DELL'S NORMAL TERMS AND CONDITIONS APPLY AND ARE AVAILABLE ONLINE OR UPON REQUEST. While all efforts are made to check pricing and other errors, inadvertent errors do occur from time to time and Dell reserves the right to decline orders arising from such errors.
Product image on the page is for your reference only.
