Attaching the Cables: Dell™
E172FP
Flat Panel Color Monitor User's Guide
Cable Connections On Back of Monitor and Computer
Turn off your computer and
unplug its power cable.
Connect the blue (analog D-sub)
display connector cable to the corresponding video port on the back of
your computer. (The graphics are for illustration only. System
appearance may vary).
Connect the power cable for
your display to the power port on the back of the display.
Plug the power cables of your
computer and your display into a nearby outlet. Your monitor is equipped with an automatic power
supply for a voltage range from 100 to 240 Volt at a frequency of 50 to 60
Hz. Be sure that your local power is within the supported range. If you
are unsure, ask yourelectricity supplier.
Turn on your display and
computer.
If your monitor displays an image, installation is complete. If it does
not display an image, see Troubleshooting.
