The display you have just purchased carries the TCO鈥?3 Displays label. This
means that your display is designed, manufactured and tested according to some
of the strictest quality and environmental requirements in the world. This makes
for a high performance product, designed with the user in focus that also
minimizes the impact on our natural environment.
Some of the features of the TCO鈥?3 Display requirements:
Ergonomics
Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.
Energy
Energy-saving mode after a certain time - beneficial both for the user and the environment
Electrical safety
Emissions
Electromagnetic fields
Noise emissions
Ecology
The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000
Restrictions on
chlorinated and brominated flame retardants and polymers
heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a
more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.
The proper operation of the function requires a
computer with VESA® DPMS power management capabilities. When
used with a computer equipped with VESA® DPMS, the monitor is ENERGY STAR®-compliant.
As an ENERGY STAR®
Partner, Dell Computer Corporation has determined that this
product meets the ENERGY STAR®
guidelines for energy efficiency.
WARNING: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
Instructions to Users: This equipment complies with the
requirements of FCC (Federal Communication Commission) equipment provided that following
conditions are met.
Power cable: Shielded power cable should be used.
Video inputs: The input signal amplitude must not exceed the
specified level.
CAUTION: Changes
or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
LG ELECTRONICS MEXICALI, S.A. DE C.V. calle orbita #36 Parque Industrial
Mexicali II Mexicali, B.C.C.P. 21600 MEXICO
LG-TONTRU COLOUR DISPLAY SYSTEM CO., LTD. No 346 Yaoxin Road Qixia
Nanjing CHINA
(factory name, address)
We hereby declare, that all major safety requirements, concerning to CE-Mark Directive
(93/68/EEC) and Low Voltage Directive (73/23/EEC), Electromagnetic Compatibility
Directives (89/336/EEC, 92/31/EEC) are fulfilled, as laid out in the guidelines set down
by the member states of the EEC Commission.This declaration is valid for all
samples that are part of this declaration, which are manufactured according to the
production charts appendix.The standards relevant for the evaluation of electrical
safety & EMC requirements are as follows :
LVD : EN 60950:2000
EMC : EN 55024:1998, EN55022:1998, EN61000-3-2, 3:1995
1. Certificate of conformity / Test report issued by :
LVD : NEMKO, TUV
EMC : SEMKO
2. Technical documentation kept at :
LG Electronics Inc.
which will be made available upon
request. (Manufacturer)
LG Electronics Inc.
642, Jinpyeong-dong, Gumi-city, Gyeong Buk, 730-727 Korea.
Yeong Hur/Manager
(Representative in the EU)
LG
Electronics Inc. Amsterdam office Veluwezoom 15, 1327 AE Almere,
The Netherlands.
European
Standards Center
Chief Research Engineer Jinseog, Kim
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference Regulations of
the Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations
provide, that changes or modifications not expressly approved by Dell Computer Corporation
could void your authority to operate this equipment.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigencesdu
Règlement sur le matériel brouilleur du Canada.
This equipment complies with the limits for a Class B digital device
(devices used in or adjacent to a residential environment) and conforms to the standards
for information technology equipment that are set by the Voluntary Control Council for
Interference for preventing radio frequency interference in residential areas.
The equipment should draw power from a socket with an attached
protection circuit (a three-prong socket). All equipment that works together (computer,
monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room's electrical installation should
have a reserve short-circuit protection device in the form of a fuse with a nominal value
no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must
be removed from the power supply socket, which should be located near the equipment and
easily accessible.
A protection mark "B" confirms that the equipment is in
compliance with the protection usage requirements of standards PN-93/T-42107 and
PN-89/E-06251.
The following information is provided on the device(s) described in
this document in compliance with the requirements of the official Mexican standards (NOM):
Exporter:
Dell Inc. One Dell Way Round Rock, TX 78682
Importer:
Dell Inc. de México, S.A. de C.V. Rio Lerma No. 302 - 4º Piso
Col. Cuauhtemoc 16500 México, D.F.
Ship to:
Dell Inc. de México, S.A. de C.V. al Cuidado de Kuehne & Nagel
de México S. de R.I., Avenida Soles No. 55
Col. Peñon de los Baños, 15520 México, D.F.
Supply voltage:
> 90/264 VAC
Frequency:
50/60 Hz
Current consumption:
1.3 A
Información para NOM (únicamente para México)
La información siguiente se proporciona en el dispositivo o en los
dispositivos descritos en este documento, en cumplimiento con los requisitos de
la Norma Oficial Mexicana (NOM):
Exporter:
Dell Inc. One Dell Way Round Rock, TX 78682
Importador:
Dell Inc. de México,
S.A. de C.V. Rio Lerma No. 302 - 4º Piso
Col. Cuauhtemoc 16500 México, D.F.
Embarcar a:
Dell Inc. de México,
S.A. de C.V. al Cuidado de Kuehne & Nagel
de México S. de R.I., Avenida Soles No. 55
Col. Peñon de los Baños, 15520 México, D.F.
Under the
requirements of German ergonomics standard EK 1/59-98, EK 1/60-98,
graphics or characters:
Blue graphics or characters in dark background are not recommended.
(This combination may increase eye fatigue due to poor visibility caused by low contrast.)
Graphics controller and monitor are recommended to be used in the
following conditions:
Vertical frequency : 60 Hz or higher.
Display mode : Dark characters in bright background.
Ergonomie Hinweis (nur Deutschland)
Um den
Anforderungen der deutschen Ergonomie-Norm EK 1/59-98, EK
1/60-98 zu antsprechen.
Wird empfahlen, die Grunfarbe Blau nicht auf dunklem Hintergrund zu
verwenden (schiechte Erkennbarkeit. Augenbelastung bei zu geringem Zeicheenkontrast).
Wird folgende Einstellung des Grafik-Controllers und Monitors
empfohlen.
Dell recommends that customers dispose of their used computer hardware,
including monitors, in an environmentally sound manner, Potential methods
include reuse of parts or whole products and recycling of product, components,
and/or materials.
* DELL'S TERMS AND CONDITIONS: All sales subject to Dell's terms and conditions. You can find them by clicking on "Terms and Conditions of Sale" located at the bottom of our website, www.dell.com.au OR on request.
WARNING: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
CAUTION: Changes
or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
