Back to Contents Page

Using the omhelp Command

Dell™ OpenManage™ Server Administrator Version 5.5

Command Line Interface User's Guide

  Example Help Commands

The omhelp command and its equivalent, <command> -?, accesses the CLI's detailed help text interface. You can get help at several levels of detail.

Each fully qualified CLI command may have a variable number of distinct parts: the command (command level 1), one or more subcommands (command level 2 and command level 3, if present), and one or more name=value pair(s).

By appending -? (space-dash-question mark) to any command, you can get help for that command.

Example Help Commands

When you type omconfig -?, you get general help about the omconfig command. The help at this level lists the available subcommands for omconfig:

• about
  
  
• preferences
  
  
• chassis
  
  
• system
  
  

When you type omconfig system -?, CLI help lists all the subcommands available for omconfig system:

• alertaction
  
  
• alertlog
  
  
• assetinfo
  
  
• cmdlog
  
  
• esmlog
  
  
• events
  
  
• recovery
  
  
• shutdown
  
  
• thrmshutdown
  
  
• webserver
  
  

Figure 2-1 shows the levels of help for a command.

Figure 2-1. Different Levels of Help for a Command

You can also parse the omconfig system assetinfo command as follows:

<command level 1 command level 2 command level 3> <name=value pair 1> [name=value pair 2]

where command levels 1, 2, and 3 are represented by omconfig system assetinfo, name=value pair 1 is represented by info=depreciation, and name=value pair 2 is represented by method=straightline.

To set your depreciation method to straight line, type:

omconfig system assetinfo info=depreciation method=straightline

The CLI responds with the following message:

Asset information set successfully.

When you type omconfig system assetinfo -?, the help that displays provides information about assigning values for the name and option fields. Partial results for the request omconfig system assetinfo -? are as follows:

assetinfo Set asset information.

For one info value, specify one or more optional parameter(s). Table 2-1 displays the optional parameters for info=acquisition:

Table 2-1. Optional Parameters 

Back to Contents Page