Specifications: Dell PowerVault 110T LTO Drive User's Guide
Back to Contents Page
Specifications: Dell™ PowerVault™ 110T LTO Tape Drive User's Guide
• General • Dell PowerVault
110T LTO External Drive • Dell PowerVault 110T LTO Internal Drive
NOTE: These specifications are provided by the manufacturer for information
purposes only and do not constitute an extension of Dell�s warranty to you.
Dell�s warranty is contained in the documentation for your system.
Specification
Value
Manufacturer
Manufactured for Dell
Model Number
DELL PowerVault 110T LTO Tape Drive: LTO Internal; LTO External
Interface Type
Ultra2 Wide SCSI Low-Voltage Differential (LVD) bus
Physical specification
dimensions: 208 mm (8.2") W, 122 mm (4.8") H, 298 mm (11.7")
D
weight: 5.3 kg (11.7 lbs)
Power requirements
power: 100-240 VAC, 50/60 Hz 0.7A max, Auto-ranging. Power connection IEC
320
Performance
interface: Ultra wide SCSI-2
recording format: LTO Ultrium Generation 1
media: LTO Ultrium
capacity: 100 GB (native) 200 GB (compressed, assuming 2:1 compression)
sustained transfer rate: native 15 MB/sec, compressed 30 MB/sec (assumes
2:1 compression)
burst transfer rate: 80 MB/sec (Ultra2 SCSI wide)
file access time (from BOT): 71s typical, 142s maximum
load to BOT: < 25s
unload from BOT: < 13s
rewind time: 142s (100 GB tape)
rewind tape speed: 4.1 m/s
reposition time: 2.5s
Operating limits
temperature: 10�C to 35�C (50�F to 95�F)
humidity: 20 to 80 RH (non-condensing), 30%/hr maximum operating humidity
rise
maximum wet bulb temperature: 26�C (78�F)
temperature gradient: < 10�C per hour
operating altitude: 0 to 4000 m (0 to 15,000 ft)
airflow: 0.17 cubic meters per minute (6 cubic feet per minute). Positive
airflow must be maintained
vibration: 0.3G pk 5-250 Hz (sine), 0.3G rms 5-250 Hz (random)
shock survival: 5G 3ms (no performance change), 2G 11ms (no performance
change), 8G 11ms (no data loss)
Non-operating limits
temperature: -40�C to 66�C (-40�F to 151�F)
humidity: 10 to 95 RH (non-condensing)
temperature rise: 20�C per hour
humidity rise: 30%/hr
non-operating altitude: 0 to 15,250 m (0 to 50,000 ft)
noise level: <5.0 bel sound power
vibration: 0.75G pk 5-500 Hz (sine), 2.41G rms 5-500 Hz (random)
shock survival: 90G 3ms (half sine), 30G 26ms (trapeziodal)
Safety and electromagnetic compatibility
CSA Certification to C22.2, No. 950 Amd 4
UL Listed to UL 1950 Amd 4
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
TUV Product Service (TUV EN60950 and IEC 950)
GOSH CB report with deviations
FCC 47 CFR Parts 2 & 15 with reference to ANSI C63.4:1992 (CISPR 22:1985
with amendments)
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
C-TICK Approved (AS/NZS 3548)
RRL Approved (RRL MIC No. 1996-18)
BCIQ Approved (CNS 13438)
Physical specification
dimensions: 146 mm (5.75") W, 82.5 mm (3.25") H, 203 mm (8.0")
D
weight: 1.9 kg (4.2 lbs)
Power requirements
power: +5V @ 5.2A typical, +12V @ 0.7A typical, +5V @ 6.3A (max), +12V @2.75A
(max)
Performance
interface: Ultra wide SCSI-2
recording format: LTO Ultrium Generation 1
media: LTO Ultrium
capacity: 100 GB (native) 200 GB (compressed, assuming 2:1 compression)
sustained transfer rate: native 15 MB/sec, compressed 30 MB/sec (assumes
2:1 compression)
burst transfer rate: 80 MB/sec (Ultra2 SCSI wide)
file access time (from BOT): 71s typical, 142s maximum
load to BOT: < 25s
unload from BOT: < 13s
rewind time: 142s (100 GB tape)
rewind tape speed: 4.1 m/s
reposition time: 2.5s
Operating limits
temperature: 10�C to 35�C (50�F to 95�F)
humidity: 20 to 80 RH (non-condensing), 30%/hr maximum operating humidity
rise
maximum wet bulb temperature: 26�C (78�F)
temperature gradient: < 10�C per hour
operating altitude: 0 to 4000 m (0 to 15,000 ft)
airflow: 0.17 cubic meters per minute (6 cubic feet per minute). Positive
airflow must be maintained
vibration: 0.3G pk 5-250 Hz (sine), 0.3G rms 5-250 Hz (random)
shock survival: 5G 3ms (no performance change), 2G 11ms (no performance
change), 8G 11ms (no data loss)
Non-operating limits
temperature: -40�C to 66�C (-40�F to 151�F)
humidity: 10 to 95 RH (non-condensing)
temperature rise: 20�C per hour
humidity rise: 30%/hr
non-operating altitude: 0 to 15,250 m (0 to 50,000 ft)
noise level: <5.0 bel sound power
vibration: 0.75G pk 5-500 Hz (sine), 2.41G rms 5-500 Hz (random)
shock survival: 90G 3ms (half sine), 30G 26ms (trapeziodal)
Safety and electromagnetic compatibility
CSA Certification to C22.2, No. 950 Amd 4
UL Listed to UL 1950 Amd 4
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
TUV Product Service (TUV EN60950 and IEC 950)
GOSH CB report with deviations
FCC 47 CFR Parts 2 & 15 with reference to ANSI C63.4:1992 (CISPR 22:1985
with amendments)
CE Declaration of Conformity CE 73/23/EEC Amended by (93/68/EEC)
C-TICK Approved (AS/NZS 3548)
RRL Approved (RRL MIC No. 1996-18)
BCIQ Approved (CNS 13438)
Back to Contents Page
