This manual contains information and instructions necessary for the safe operation
of your library. Be sure to read all safety instructions in your Product Information Guide before operating this product.
Intended Use
This equipment is designed for processing magnetic tape cartridges. Any other
application is not considered the intended use. Dell shall not be held liable
for damage arising from unauthorized use of the library. The user assumes all
risk in this aspect.
Basic Rules of Operation
Observe the following basic rules for installation, use, and servicing of the library:
CAUTION: This
unit is engineered and manufactured to assure your personal safety. Improper
use can result in potential electrical shock or fire hazards.Be
sure to read all safety instructions in your Product Information Guide.
Adhere to all warnings on the product and in the operating instructions.
Follow all installation and operating instructions.
Situate the library so that its location or position provides adequate
front and rear ventilation.
Situate the product away from heat sources such as radiators, heat registers, furnaces, or other heat-producing appliances.
Connect the library to a power source only of the type directed in the operating instructions or as marked on the product label.
Route the AC line cord so that it is not likely to be walked on or pinched by items placed upon or against it, paying particular attention to the cord at the wall receptacle, and the point where the cord exits from the product.
Take care to ensure that objects do not fall and liquids are not spilled into the product's enclosure through openings.
Do not attempt to service the product beyond that described in this manual. All other servicing should be referred to qualified service personnel.
Do not use oil, solvents, gasoline, paint thinners, or insecticides on the unit or near the unit. Vapors from these types of chemicals can damage the tape media components.
Do not expose the unit to moisture or the store unit in high temperatures
or extreme low temperatures.
Keep the unit away from direct strong magnetic fields, excessive dust, and electronic/electrical equipment that generate electrical noise.
Hold the AC power plug by the head when removing it from the AC source outlet; pulling the cord can damage the internal wires.
Use the unit on a firm, level surface free from vibration.
Explanation of Symbols
The following symbols and highlighted passages note important information.
Table 1. Definition of Symbols
Symbol
Identification
Definition
CAUTION:
A CAUTION indicates a potential
for property damage, personal injury, or death.
NOTICE:
A NOTICE indicates either potential
damage to hardware or loss of data and tells you how to avoid the problem.
NOTE:
A NOTE indicates important information
that helps you make better use of your storage device.
An operator is responsible for ensuring that only qualified personnel perform
the following procedures on the equipment:
Prepare for operation
Set-up
Start-up
Operate
Shutdown
Maintenance
Restart
This manual provides sufficient training information for operation of your
library. It is recommend that you read through the manual before using your
library.
NOTICE: Operation
of the library by untrained personnel can lead to equipment malfunction
and void the warranty.
CAUTION:Some work and modification can only be performed with the appropriate
qualifications and training (for example, replacement of the power supply).
Most importantly, know and observe all safety rules before working with
this equipment. Be sure to read all safety instructions in your Product Information Guide.
