|
Safety: Dell PowerVault 136T SDLT Library User's Guide
Back to Contents Page
Safety: Dell
PowerVault
136T SDLT Library User's Guide
 NOTE:
In addition to the safety instructions presented in this guide, local and professional
safety rules apply.
Avoid dangerous
situations while operating the Dell PowerVault 136T SDLT Library by following
all safety procedures and operating the equipment carefully. Read and follow
all instructions in this guide. It
is mandatory that operators of the Dell PowerVault 136T SDLT Library understand
and comply with all instructions contained in this guide and other related documentation.
Intended
Use
This equipment
is designed for processing:
Any other
application is not considered the intended use. Dell shall not be held liable
for damage arising from unauthorized use of the library. The user assumes all
risk in this aspect.
Hazard
Alert Messages
Emphasized
paragraphs in this guide warn of danger or draw attention to important information.
Dell
classifies hazards in several categories. Table 1 shows the relationship of
the symbols, signal words, actual hazards, and possible consequences.
Table 1. Hazard Alert Messages
|
Symbol
|
Damage
to ...
|
Signal
Word
|
Definition
|
Consequence
|
|
Person |
WARNING |
Imminent hazardous
electrical or mechanical situation |
Death or serious
injury |
|
Material |
CAUTION |
Potential damaging
situation |
Possible damage
to the product, data, or environment |
|
|
|
NOTE |
Indicates important
information that helps make better use of the system |
No hazardous or
damaging consequences |
Area
of Application
NOTE:
Other manufacturer documentation is an integral part of the Dell PowerVault 136T SDLT Library User's Guide documentation set.
This information
applies to the entire Dell PowerVault 136T SDLT Library family. Further safety
instructions for components used in the equipment are not invalidated by these
instructions.
Protective
Devices
The Dell PowerVault 136T SDLT Library is equipped with the following protective devices:
- Monitored
access to the library
- Front
Power Switch
- Rear
Power Switch
Library Enclosure
The Dell PowerVault 136T SDLT Library is completely surrounded by an enclosure. The library
can only be accessed through monitored access area(s). The
enclosure around the library separates the danger area of the Dell PowerVault 136T SDLT Library from the normal working area. The danger area of the library
is the area in which personnel can be injured by component movements.
WARNING:
Movements of mechanical components in the library can cause serious injury.
Access to the library should be restricted to authorized personnel only.
Mechanical
Lock
The library
access door can only be opened with a key from the outside. Authorized personnel
are responsible for the security of the key.
Front
Power Switch
Switching
off the Front Power Switch removes power from the electronics which causes the
picker to stop immediately. This switch also removes power from the drives.
The library still has standby power applied. Therefore, the library is not
completely disconnected from the power source.
Rear
Power Switch
Switching
off the Rear Power Switch removes all power from the library. In case of danger
to personnel or property, immediately switch off the Rear Power Switch.
WARNING:
To completely remove all power, either use the Rear Power
Switch or disconnect the line cord from the electrical source.
WARNING:
Except in
emergencies, stop the Dell PowerVault 136T SDLT Library with the normal shutdown
procedure before switching off the Rear Power Switch. Dell is not responsible
for damage caused by improper use of the Rear Power Switch. Such risk lies entirely
with the user.
WARNING:
Movements of mechanical components in the Dell PowerVault 136T SDLT Library can
cause serious injury. Before turning the Front or Rear Power Switch on and restarting
the Dell PowerVault 136T SDLT Library, confirm that no danger exists to personnel
or property.
Back to Contents Page
| 
