|
Jumpers: Creative PC-DVD Encore Dxr2 User's Guide
Back to Contents Page
Jumpers: Creative PC-DVD™ Encore Dxr™2 User's Guide
Jumper Settings • Jumper
Locations
The master/slave jumper (see Table 1) sets the PC-DVD drive
as master or slave when you connect it to another PC-DVD or CD-ROM drive.
Table 1. Master/Slave Jumper Settings
|
Abbreviation
|
Setting
|
Definition |
C
S |
Cable Select |
Reserved; must not be used. |
S
L |
Slave |
If jumpered, sets the PC-DVD drive as
slave when you connect it to another PC-DVD or CD-ROM drive. This is the
default. |
M
A |
Master |
If jumpered, sets the PC-DVD drive as
master when you connect it to another PC-DVD or CD-ROM drive. Use this
setting when the PC-DVD drive is the only drive on the IDE data cable. |
|
NOTE: The appearance of your PC-DVD drive's back
panel may differ slightly from Figure 1. |
Figure 1. Jumper Location on PC-DVD Drive
Please read all restrictions
and disclaimers.
Back to Contents Page
| 
