Back to Contents Page

Replacing the Computer Cover

Dell Studio XPS™ 435MT Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against likelihood of electric shock, laceration by moving fan blades or other unexpected injuries, always unplug your computer from the electrical outlet before removing the cover.

CAUTION: Ensure that sufficient space exists to support the system with the cover removed—at least 30 cm (1 ft.) of desk top space.

1. Follow the procedures in Before You Begin.
   
   
2. Lay your computer on its side with the computer cover facing up.
   
   
3. Open the padlock, if applicable.
   
   
4. Remove the two screws securing the cover, using a flat-blade screwdriver.
   
   

1	computer cover	2	front of the computer
3	screws (2)	4	cover grip

5. Pull the cover grip towards the back of the computer, and lift the computer cover away from the computer.
   
   
6. Set the computer cover aside in a secure location.
   
   
7. To replace the computer cover, perform the removal procedure in reverse order.
   
   

Back to Contents Page