CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.
CAUTION: Before working inside your computer, read the safety instructions in your Product Information Guide.
NOTICE: To prevent data loss, shut down your computer before removing the hard drive. Do not remove the hard drive while the computer is on, in standby mode, or in hibernate mode.
NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive.
NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell.
Loosen the four captive screws on the hard drive cover and lift the cover away from the
computer.
1
captive screws (4)
2
hard drive cover
3
hard drive
Lift the hard drive toward the back of the computer.
Use the plastic tab to disconnect the hard drive cable from the hard drive.
1
hard drive
2
alignment pin
3
plastic tab
4
hard drive cable
NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting Against Electrostatic Discharge" in your Product Information Guide.