|
|
|
|
| Microprocessor type |
Intel® Pentium® II or
Pentium III microprocessor |
| Internal cache |
32 kilobyte (KB) (16-KB data
cache, 16-KB instruction cache) |
| L2 cache memory |
512-KB pipeline burst, 4-way
set-associative, write-back static random-access memory (SRAM) |
| Math coprocessor |
Internal to the
microprocessor |
|
| Architecture |
64-bit (non-error checking
and correction [ECC]) or 72-bit (ECC), noninterleaved, "PC100" 100 megahertz
(MHz) |
| Dual inline memory module
(DIMM) sockets |
Three (gold contacts) |
| DIMM capacities |
32-, 64-, 128-, and
256-megabyte (MB) synchronous dynamic
random-access memory (SDRAM) |
| System RAM |
32–768 MB |
| Basic input/output system
(BIOS) address |
F0000h |
|
| System chip set |
Intel 440BX PIIX4e |
| Data bus width |
64 bits |
| Address bus width |
32 bits |
| Direct memory access (DMA)
channels |
Eight |
| Interrupts |
15 |
| System BIOS |
2-megabit (Mb) flash chip |
| System clock |
66 or 100 MHz (matches
external bus speed) |
|
| Video type |
Integrated ATI Rage Pro (AGP
2X) graphics |
| Video memory |
4 MB standard (upgradable to
8 MB) synchronous graphics RAM (SGRAM) |
| Video resolutions |
640 x 480; true-color (32
bits per pixel [bpp]); 85 hertz (Hz); 4 MB SGRAM
800 x 600; true-color (32 bpp); 85 Hz; 4 MB SGRAM
1024 x 768; true-color (32 bpp); 85 Hz;
4 MB SGRAM
1280 x 1024; true-color (32 bpp); 85 Hz;
8 MB SGRAM
1600 x 1200; 65,535 colors (16 bpp); 75 Hz;
8 MB SGRAM |
|
| Model |
Crystal Semiconductor |
| Chip set |
CS4236 |
|
| Bus types |
Peripheral Component
Interconnect (PCI) |
| Bus speed |
33 MHz |
| Expansion-card connectors: |
Two PCI expansion slots
(half-length PCI expansion cards only) |
PCI expansion-card connector size
|
120 pins |
PCI expansion-card connector data width (maximum)
|
32 bits |
|
| Externally accessible bays |
One 3.5-inch bay for a
3.5-inch diskette drive; one 5.25-inch bay for a removable media device (slim-height
devices only) |
| Internally accessible bays |
One bay for a 1-inch-high enhanced integrated drive electronics (EIDE) hard-disk drive |
|
| Externally
accessible: |
Serial (data terminal equipment [DTE])
|
Two 9-pin connectors;
16550-compatible |
Parallel
|
25-hole connector
(bidirectional) |
Video
|
15-hole connector |
Network interface controller (NIC)
|
RJ45 connector |
Personal System/2 (PS/2)-style keyboard
|
6-pin mini-Deutsche Industrie Norm (DIN) |
PS/2-compatible mouse
|
6-pin mini-DIN |
Universal Serial Bus (USB)
|
Two USB-compliant connectors |
Audio line-in
|
Miniature audio jack |
Audio line-out
(amplified source)
|
Miniature audio jack |
Microphone
|
Miniature audio jack |
| Internally
accessible: |
Primary EIDE hard-disk drive
|
40-pin connector on PCI local
bus |
Secondary EIDE hard-disk drive
|
40-pin connector on PCI local
bus |
Diskette drive
|
34-pin connector |
ATI multimedia
|
40-pin connector |
Advanced Technology Attachment Packet Interface (ATAPI)
|
4-pin connector |
|
| <Ctrl><Alt><Del> |
Restarts (reboots) the system |
| <Ctrl><Alt><\> |
Toggles microprocessor speeds
on 101-key keyboard (in MS-DOS® real mode only) |
| <Ctrl><Alt><#> |
Toggles microprocessor speeds
on 102-key keyboard (in MS-DOS real mode only) |
| <F2> or
<Ctrl><Alt><Enter> |
Starts the System Setup
program (during power-on system test [POST] only) |
| <F3> or <F12> |
Automatically starts (boots)
the system from the network environment specified by the Managed Boot Agent (MBA) rather
than from one of the devices in the System
Setup Boot
Sequence option |
| <F10> |
Launches the utility
partition (if installed) during system start-up |
|
| Reset control |
No reset button on
small-form-factor systems |
| Power control |
Push button |
| Power indicators |
Green light-emitting diode
(LED) on riser board; blinking green in sleep state; dual-color LED on front
panel—green for power, yellow for diagnostics |
| Hard-disk drive access
indicator |
Green LED |
| Link integrity indicator (on
NIC connector) |
Green LED for 10-Mb
operation; orange LED for 100-Mb operation |
| Activity indicator (on NIC
connector) |
Yellow LED |
|
| DC power supply: |
Wattage
|
Small-form-factor chassis:
110 |
Heat dissipation
|
Small-form-factor chassis: 808 British
thermal units (BTU)/hr (nominal) |
Voltage
|
90 to 135 volts (V) at 60 Hz;
180 to 265 V at 50 Hz |
| Backup battery |
3-V CR2032 coin cell |
|
| Height |
9.1 cm (3.6 inches) |
| Width |
31.8 cm (12.5 inches) |
| Depth |
37.8 cm (14.9 inches) |
| Weight |
6.6 kilograms (kg) (14.5
pounds [lb]) |
|
| Temperature: |
Operating
|
10° to 35°Celsius (C) (50°
to 95°Fahrenheit [F]) |
Storage
|
–40° to 65°C
(–40° to 149°F) |
| Relative humidity |
20% to 80% (noncondensing) |
| Maximum
vibration: |
Operating
|
0.25 gravities (G) at 3 to
200 Hz at 1 octave/min |
Storage
|
0.5 G at 3 to 200 Hz at 1
octave/min |
| Maximum shock: |
Operating
|
Bottom half-sine pulse with a
change in velocity of 20 inches/sec (50.8 cm/sec) |
Storage
|
27-G faired square wave with
a velocity change of 200 inches/sec (508 cm/sec) |
| Altitude: |
Operating
|
–16 to 3048 meters (m)*
(–50 to 10,000 feet [ft]) |
Storage
|
–16 to 10,600 m
(–50 to 35,000 ft) |
| * The maximum
operating temperature of 35°C (95°F) is for altitudes below 914.6 m (3000 ft). Above
914.6 m the maximum operating temperature is reduced. |
