NIC: Dell OptiPlex GX1 Systems
NIC: Dell™ OptiPlex™ GX1 Systems
The OptiPlex GX1 systems are available with or without an
integrated Ethernet NIC subsystem.
The integrated 10/100-Mbps 3Com� PCI 3C905B-TX Ethernet
NIC subsystem supports the Wakeup
On LAN feature and the 10BASE-T and 100BASE-T
standards. The NIC subsystem connects to the Ethernet network through a single RJ45
connector on the back of the computer. The RJ45 connector and the NIC interface circuitry
are mounted on the system board.
The NIC connector on the computer’s back panel has
the following indicators:
- A yellow activity indicator that flashes when the system is
transmitting or receiving network data. (A high volume of network traffic may make this
indicator appear to be in a steady “on” state.)
- A green link integrity indicator that lights up when there
is a good connection between the network and the NIC. When the green indicator is off, the
system is not detecting a physical connection to the network.
See Chapter 4, "Using Integrated Devices," in
the Reference and Installation
Guide for information on configuring the NIC.
| 
