Back to Contents Page

Battery Status Light Board

Dell™ Inspiron™ 1010 Service Manual

  Removing the Battery Status Light Board

  Replacing the Battery Status Light Board

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the Battery Status Light Board

1. Follow the instructions in Before You Begin.
   
   
2. Remove the battery (see Removing the Battery).
   
   
3. Remove the keyboard (see Removing the Keyboard).
   
   
4. Remove the palm rest (see Removing the Palm Rest).
   
   
5. Remove the hard drive (see Removing the Hard Drive).
   
   
6. Remove the palm rest bracket (see Removing the Palm Rest Bracket).
   
   
7. Disconnect the battery status light board cable from the system board connector.
   
   
8. Lift the battery status light board off the computer base.
   
   

1	battery status light board cable connector	2	battery status light board cable
3	battery status light board

Replacing the Battery Status Light Board

1. Replace the battery status light board on the computer base.
   
   
2. Connect the battery status light board cable to the system board connector.
   
   
3. Replace the palm rest bracket (see Replacing the Palm Rest Bracket).
   
   
4. Replace the hard drive (see Replacing the Hard Drive).
   
   
5. Replace the palm rest (see Replacing the Palm Rest).
   
   
6. Replace the keyboard (see Replacing the Keyboard).
   
   
7. Replace the battery (see Replacing the Battery).
   
   

Back to Contents Page