User Guide

User Guide
Coin-Cell Battery: Dell Inspiron 1011 Service Manual

Back to Contents Page

Coin-Cell Battery

Dell™ Inspiron™ 1011 Service Manual

  Removing the Coin-Cell Battery

  Replacing the Coin-Cell Battery


WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

Removing the Coin-Cell Battery

  1. Follow the instructions in Before You Begin.

  2. Follow the instructions from step 2 to step 10 in Removing the System Board.

1

coin-cell battery

2

coin-cell battery cable connector

  1. Disconnect the coin-cell battery cable from the system board connector.

  2. Lift the coin-cell battery off the computer base.


Replacing the Coin-Cell Battery

  1. Replace the coin-cell battery.

  2. Connect the coin-cell battery cable to the system board connector.

  3. Follow the instructions from step 3 to step 11 in Replacing the System Board.


Back to Contents Page

 

© 2012 Dell | Terms of Sale | Unresolved Issues | Privacy | Site Map | Feedback

snWEB2