User Guide

User Guide
Charger Board: Dell Inspiron 1318 Service Manual

Back to Contents Page

Charger Board

Dell™ Inspiron™ 1318 Service Manual

  Removing the Charger Board

  Replacing the Charger Board


CAUTION: Before performing the following procedures, follow the safety instructions shipped with your computer.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

Removing the Charger Board

  1. Follow the procedures in Before You Begin.

  2. Remove the system board (see System Board).

  3. Remove the screw that secures the charger board to the base of the computer.

1

M2 x 3-mm screw

2

charger board

  1. Lift the charger board away from the base of the computer.


Replacing the Charger Board

  1. Align the screw hole on the charger board with the screw hole on the base of the computer.

  2. Replace the screw that secures the charger board to the base of the computer.

  3. Replace the system board (see System Board).

  4. Slide the battery into the battery bay, until it clicks into place.


Back to Contents Page

 

Laptops | Desktops | Business Laptops | Business Desktops | Workstations | Servers | Storage | Monitors | Printers | Electronics
All rights reserved : About Dell | Site Terms | Terms and Conditions | Unresolved Issues | Privacy | Returns Policy | Site Map | Feedback

* DELL'S TERMS AND CONDITIONS: All sales subject to Dell's terms and conditions. You can find them by clicking on "Terms and Conditions of Sale" located at the bottom of our website, www.dell.com.au OR on request.

snWEB2