Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Inspiron™ 1525/1526 Service Manual

Removing the Processor Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

1. Follow the instructions in Before You Begin.
   
   
2. Turn the computer over.
   
   
3. Remove the eight captive screws securing the back cover and remove the module cover.
   
   

1

module cover

2

captive screws (8)

4. In sequential order, loosen the five captive screws securing the processor thermal-cooling assembly to the system board, then carefully lift the processor thermal-cooling assembly out of the computer.
   
   

Replacing the Processor Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

1. Align the five captive screws on the processor thermal-cooling assembly with the screw holes on the system board.
   
   
2. In sequential order, tighten the five captive screws to secure the processor thermal-cooling assembly to the system board.
   
   
3. Replace the module cover and tighten the eight captive screws.
   
   

Back to Contents Page