Ensure that the AC adapter is plugged in and that the main battery is
installed properly.
NOTE: If you use a BIOS
update program CD to
flash the BIOS, set up the
computer to boot from a
CD before inserting the
CD.
Insert the BIOS update program floppy disk or CD, and turn on the
computer.
Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the computer will automatically reboot.
Press
during POST to enter the system setup program.
Press
and
to reset the computer defaults.
Press
, select Save changes and reboot, and press
to
save configuration changes.
Remove the flash BIOS update program floppy disk or CD from the
drive and restart the computer.
during POST to enter the system setup program.
and 
to reset the computer defaults.
, select Save changes and reboot, and press 
to
save configuration changes.