Back to Contents Page

Internal Card With Bluetooth^® Wireless Technology

Dell™ Latitude™ D531 Service Manual

  Removing the Card With Bluetooth Wireless Technology

  Replacing the Card With Bluetooth Wireless Technology

If you ordered an internal card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Card With Bluetooth Wireless Technology

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.

1. Follow the procedures in Before Working Inside Your Computer.
   
   
2. Remove the hinge cover (see Removing the Hinge Cover).
   
   
3. Pull the card cable connector out from the metal tab.
   
   

1

metal tab

2

card

3

cable connector

4. Pull the cable connector from the card connector.
   
   

1

card

2

card connector

3

cable connector

NOTICE: Be careful when removing the card to avoid damaging the card, card cable, or surrounding components.

Replacing the Card With Bluetooth Wireless Technology

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.

1. Connect the cable connector to the card connector.
   
   
2. Slide card cable connector beneath the metal tab.
   
   
3. Replace the hinge cover (see Replacing the Hinge Cover).
   
   

Back to Contents Page