CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.
Loosen the captive screw securing the memory module/coin-cell battery cover, then remove the
cover and set it aside.
1
captive screw
2
memory module/coin-cell battery cover
Insert a plastic scribe into the guide on the side of the coin-cell battery compartment, and then
ease the battery out of the compartment.
1
coin-cell battery
Replacing the Coin-Cell Battery
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as the back panel on the computer.
Insert the battery at a 30-degree angle under the clip with the positive (+) side up, and then push the
battery into place.
Replace the memory module/coin-cell battery cover and tighten the screw.
