Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Latitude™ D830  Service Manual

CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the computer.

1. Follow the procedures in Before You Begin.
   
   
2. Remove the hinge cover (see Hinge Cover).
   
   
3. Remove the keyboard (see Keyboard).
   
   
4. Remove the display assembly (see Display Assembly).
   
   
5. Remove the palm rest (see Palm Rest).
   
   
6. Loosen in consecutive order the six captive screws, labeled "1" through "6" that secure the processor thermal-cooling assembly.
   
   

NOTE: The appearance of the thermal-cooling assembly for system boards with integrated graphics varies from that for system boards with discrete graphics (shown). The thermal-cooling assembly for discrete graphics (shown) has six captive screws to loosen versus five captive screws for the integrated graphics solution.

1

processor thermal-cooling assembly

2

captive screws (6)

7. Lift the assembly out of the computer.
   
   

Back to Contents Page