Back to Contents Page

Coin-Cell Battery

Dell™ Latitude™ E5400 and E5500 Service Manual

  Removing the Coin-Cell Battery

  Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Remove the bottom of the base assembly (see Removing the E5400 Bottom of the Base Assembly or Removing the E5500 Bottom of the Base Assembly).
   
   
3. Disconnect the coin-cell battery cable connector from the system board.
   
   
4. Lift the coin-cell battery from the system board.
   
   

1

E5400 coin-cell battery

2

coin-cell battery cable connector

1

E5500 coin-cell battery

2

coin-cell battery cable connector

Replacing the Coin-Cell Battery

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE: This procedure assumes that you have completed the removal procedure first.

1. Connect the coin-cell battery cable connector to the system board.
   
   
2. Position the coin-cell battery on the system board.
   
   
3. Replace the bottom of the base assembly (see Replacing the E5400 Bottom of the Base Assembly or Replacing the E5500 Bottom of the Base Assembly).
   
   
4. Follow the procedures in After Working on Your Computer.
   
   

Back to Contents Page