Back to Contents Page

LED Cover

Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual

  Removing the LED Cover

  Replacing the LED Cover

Removing the LED Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

1. Follow the procedures in Before Working on Your Computer.
   
   
2. Locate the tabs in the battery bay that secure the LED cover to the top of the computer.
   
   
3. Using a plastic scribe, gently push on the tabs to release the LED cover.
   
   

4. Turn the computer topside up, then open the display and remove the LED cover.
   
   

Replacing the LED Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.

1. Working at an angle, snap the LED cover into place one tab at a time.
   
   
2. Follow the procedures in After Working on Your Computer.
   
   

Back to Contents Page