User Guide

User Guide
Dell Latitude XT2 Service Manual--Removing and Replacing the Hard Drive

Hard Drive

Dell™ Latitude™ XT2 Service Manual

  Removing the Hard Drive

  Replacing the Hard Drive


WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Hard Drive

Hard Drive

  1. Follow the procedures in Before Working Inside Your Tablet-PC.
  2. Remove the battery from the Tablet-PC.

Establising Image

  1. Loosen the four captive screws on the hard drive bracket.

Loosen the four captive screws on the hard drive bracket.

  1. Remove the hard drive bracket.

Remove the hard drive bracket.

  1. Slide the hard drive towards the edge of the Tablet-PC to disconnect from the system board.

Slide the hard drive towards the edge of the system to disconnect from the systemboard.

  1. Remove the hard drive from the Tablet-PC.

Remove the hard drive from the system.

Complete

 

Replacing the Hard Drive

  1. Slide the new hard drive into position gently until the connector end fits into the system-board connector.
  2. Secure the hard drive into place by replacing the hard drive bracket. Attach the bracket to the Tablet-PC with the four captive screws.
  3. Replace the battery. See Replacing the Main Battery.

© 2012 Dell | Terms of Sale | Unresolved Issues | Privacy | Site Map | Feedback

snWEB3