|
|
| Microprocessor type |
Intel� Pentium� III microprocessor |
| Internal cache |
32-kilobyte (KB) first-level (16-KB
data cache; 16-KB instruction cache) |
| Level 2 (L2) cache memory |
integrated 256-KB at full
microprocessor speed |
| Math coprocessor |
internal to Pentium III microprocessor |
|
| Architecture |
100-megahertz (MHz) synchronous dynamic
random-access memory (SDRAM) |
| Dual in-line memory module
(DIMM) sockets |
two (non-error checking and correction
[ECC]) |
| DIMM capacities |
32-, 64-, 128-, and 256-megabyte (MB)
SDRAM |
| System random-access memory (RAM) |
32 to 512 MB |
| Basic input/output system (BIOS) address |
F0000h |
|
| System chip set |
Intel 810e |
| Data bus width |
64 bits |
| Address bus width |
32 bits |
| DMA channels |
eight |
| Interrupts |
15 |
| System BIOS |
Desktop Management Interface (DMI) 2.0s-
and system management BIOS 2.3-compliant BIOS in 4-megabit (Mb) flash chip |
| System clock |
100 or 133 MHz (matches external bus
speed) |
| Network interface controller |
3Com 3c905c |
|
| Graphics architecture |
Intel Dynamic Video Memory (DVM) technology |
| Graphics accelerator |
Intel Direct Accelerated Graphics Port (AGP) 2D and 3D
graphics accelerator |
| Display cache |
4-MB, 133-MHz synchronous dynamic random-access memory
(SDRAM) |
| Graphics memory |
Dynamically assigned from
system memory |
Video
resolutions
(display supports some or all of these resolutions) |
640 x 480 pixels; 85 hertz (Hz) max refresh rate
with 16.7 million colors
800 x 600 pixels; 85 Hz max refresh rate with 16.7 million colors
1024 x 786 pixels; 85 Hz max refresh rate with 16.7 million colors
1152 x 864 pixels; 85 Hz max refresh rate with 16.7 million colors
1280 x 1024 pixels; 85 Hz max refresh rate with 16.7 million colors
1600 x 1200 pixels; 75 Hz max refresh rate with 256 colors |
|
| Audio type |
Sound Blaster emulation |
| Audio controller |
Analog Devices AD1881 AC97
Codec |
| Stereo conversion |
16 bit (analog-to-digital and
digital-to-analog) |
| Interfaces: |
Internal
|
PCI bus/AC97 |
External
|
stereo line-in minijack;
microphone-in minijack;
headphones/speakers-out minijack |
|
| Bus types |
Peripheral Component Interconnect (PCI),
Industry-Standard Architecture (ISA)* |
| Bus speed |
PCI—33 MHz
ISA—8.33 MHz |
Small-form-factor chassis
expansion-card connectors: |
|
Standard PCI riser board
|
two PCI expansion slots |
Low-profile chassis
expansion-card connectors: |
|
Standard PCI riser board
|
three PCI expansion slots |
Optional PCI/ISA riser board
|
one PCI expansion slot; one ISA expansion
slot; one shared PCI/ISA expansion slot |
Midsize chassis
expansion-card connectors: |
|
Standard PCI riser board
|
five PCI expansion slots |
Optional PCI/ISA riser board
|
two PCI expansion slots; two ISA expansion
slots; one shared PCI/ISA expansion slot |
Mini tower chassis
expansion-card connectors: |
|
Standard PCI riser board
|
five PCI expansion slots |
Optional PCI/ISA riser board
|
three PCI expansion slots; two ISA
expansion slots; two shared PCI/ISA expansion slots |
| PCI expansion-card connector size |
120 pins |
| PCI expansion-card connector data width
(maximum) |
32 bits |
| ISA expansion-card connector size |
98 pins |
| ISA expansion-card connector data width
(maximum) |
16 bits |
*If you choose one of the optional riser boards with ISA expansion-card
connectors, evaluate the performance of any ISA expansion cards on a single system before
you order other ISA riser boards. Dell recommends this step due to the broad range of ISA
implementations in the computer industry.
|
| Externally accessible bays: |
Small-form-factor chassis
|
one 3.5-inch bay for a 3.5-inch diskette drive; one
5.25-inch bay for a removable media device (slim-height devices only) |
Low-profile chassis
|
one 3.5-inch bay for a 3.5-inch diskette drive; one
5.25-inch bay for a removable media device |
Mini tower chassis
|
one 3.5-inch bay for a 3.5-inch diskette drive; three
5.25-inch bays for removable media devices |
| Internally accessible bays: |
Small-form-factor chassis
|
one bay for a 1-inch-high
enhanced integrated drive electronics (EIDE) hard-disk drive |
Low-profile chassis
|
one bay for a 1-inch-high
EIDE hard-disk drive |
Mini tower chassis
|
two 3.5-inch bays for either one or two 1-inch-high
hard-disk drives, or one 1-inch-high hard-disk drive and one 1.6-inch-high hard-disk drive |
|
| Externally accessible: |
Serial (data terminal equipment [DTE])
|
two 9-pin connectors; 16550-compatible |
Parallel
|
25-hole connector (bidirectional) |
Video
|
15-hole connector (on video card) |
Integrated network interface controller (NIC)
|
RJ45 connector |
Personal System/2 (PS/2)-style keyboard
|
6-pin mini-Deutsche Industrie Norm (DIN) |
PS/2-compatible mouse
|
6-pin mini-DIN |
Universal Serial Bus (USB)
|
two USB-compliant connectors |
| Internally accessible: |
Primary EIDE hard-disk drive
|
40-pin connector on PCI local bus |
Secondary EIDE hard-disk drive
|
40-pin connector on PCI local bus |
Diskette drive
|
34-pin connector |
Remote Wake Up
|
3-pin connector |
Fan
|
3-pin connector |
|
| <Ctrl><Alt><Del> |
restarts (reboots) the system |
| <Ctrl><Alt><\> |
toggles microprocessor speeds on 101-key keyboard (in MS-DOS� real mode
only) |
| <Ctrl><Alt><#> |
toggles microprocessor speeds on 102-key keyboard (in
MS-DOS real mode only) |
| <F2> or
<Ctrl><Alt><Enter> |
starts embedded System Setup (during power-on system
test [POST] only) |
| <F3> or <F12> |
automatically starts (boots) the system from the
network environment specified by the managed boot agent (MBA) rather than from one of the
devices in the System Setup Boot Sequence option |
| <Ctrl><Alt><F10> |
launches the utility partition (if installed) during
system start-up |
|
| Reset control |
push button (no reset button on small-form-factor systems) |
| Power control |
push button |
| Power indicators |
green light-emitting diode (LED) on riser
board—blinking green in sleep state; dual-color LED on front panel—green for
power, yellow for diagnostics |
| Hard-disk drive access indicator |
green LED |
| Link integrity indicator (on optional
integrated NIC connector) |
green LED for 10-Mb operation; orange LED for 100-Mb operation |
| Activity indicator (on optional integrated
NIC connector) |
yellow LED |
|
| DC power supply: |
Wattage
|
small-form-factor chassis: 110 watts (W);
low-profile chassis: 145 W;
midsize chassis: 200 W;
mini tower chassis: 200 W |
Heat dissipation
|
small-form-factor chassis: 808 BTU/hr
(nominal);
low-profile chassis: 808 BTU/hr (nominal);
midsize chassis: 913 BTU/hr (nominal);
mini tower chassis: 913 BTU/hr (nominal) |
Voltage
|
90 to 135 volts (V) at 60 Hz; 180 to 265 V at 50 Hz |
| Backup battery |
3-V CR2032 coin cell |
|
| Small-form-factor chassis: |
|
Height
|
9.1 centimeters
(cm) (3.6 inches) |
Width
|
31.8 cm (12.5 inches) |
Depth
|
37.8 cm (14.9 inches) |
Weight
|
6.6 kilograms (kg) (14.5
pounds [lb]) |
| Low-profile chassis: |
|
Height
|
10.9 cm (4.3 inches) |
Width
|
40.9 cm (16.1 inches) |
Depth
|
43.7 cm (17.2 inches) |
Weight
|
10.9 kg (24 lb) |
| Midsize chassis: |
Height
|
16.5 cm (6.5 inches) |
Width
|
41.9 cm (16.5 inches) |
Depth
|
44.5 cm (17.5 inches) |
Weight
|
12.7 kg (28 lb) |
| Mini tower chassis: |
|
Height
|
44.4 cm (17.5 inches) |
Width
|
20.6 cm (8.1 inches) |
Depth
|
43.7 cm (17.2 inches) |
Weight
|
14.9 kg (33.0 lb) or more,
depending on options installed |
|
| Temperature: |
Operating
|
10� to 35� Celsius (C) [50� to 95� Fahrenheit [F]) |
Storage
|
–40� to 65�C (–40� to 149�F) |
| Relative humidity |
20% to 80% (noncondensing) |
| Maximum vibration: |
Operating
|
0.25 gravities (G) at 3 to 200 Hz at 1 octave/min |
Storage
|
0.5 G at 3 to 200 Hz at 1 octave/min |
| Maximum shock: |
Operating
|
bottom half-sine pulse with a change in velocity of 20
inches/sec (50.8 cm/sec) |
Storage
|
27-G faired square wave with a velocity change of 200
inches/sec (508 cm/sec) |
| Altitude: |
Operating
|
–16 to 3048 meters
(m) (–50 to 10,000 feet [ft]) |
Storage
|
–16 to 10,600 m (–50 to 35,000 ft) |
