Back to Contents Page

Front-Panel Inserts

Dell™ OptiPlex™ GX240 Service Manual

  Removing Front-Panel Inserts

  Replacing Front-Panel Inserts

Removing Front-Panel Inserts

1. On the small form-factor and small desktop computers, perform the following steps.
   
   
   1. Face the front of the computer and use your fingers to remove the front-panel cover.
      
      
   2. Press on the insert until it pops free of the front-panel cover.
      
      
2. On the small mini-tower computer, perform the following steps.
   
   
   1. Open the computer cover to a 45-degree angle and disconnect the CD/DVD drive data cable.
      
      
   2. Open the cover to a 90-degree angle and release the insert tabs from inside the chassis.
      
      
   3. Press on the insert until it pops free of the front-panel cover.
      
      

Small Form-Factor Computer

Small Desktop Computer

Small Mini-Tower Computer

Replacing Front-Panel Inserts

To replace a front-panel insert, follow the appropriate procedure, in reverse, in "Removing Front-Panel Inserts."

Back to Contents Page