To remove the top and bottom panels of the computer, remove any installed CD drives and
release all the tabs on each panel.
1
computer cover tab (remove the CD drive to access this tab)
4
bottom panel
2
top-panel tabs
5
computer cover screw
3
top panel
6
computer cover tabs (2)
To prepare the computer cover for removal, release the three computer cover tabs (one tab is
located by the CD drive and two tabs are located by the I/O panel).
NOTE: To release the tab located by the CD drive, you can pry the computer cover away from the
computer and pull out the tab.
If necessary, remove the computer cover screw.
Close the computer and remove the computer cover.
Remove the screw that secures the control panel to the computer, and pull the control panel
away from the computer.
Replacing the Control Panel
Small Form-Factor Computer
Replace the control panel and the control-panel shield.
Replace the computer cover. Ensure that the two metal hooks and tabs are securely in place.
To help replace the computer cover, remove the accent door and front mask from the computer cover:
Remove the front mask by releasing the tabs on the inside of the computer cover.
Remove the accent door by pressing the middle of the door while you lift away the sides
of the door.
1
accent door
2
front mask
Replace the computer cover and ensure that the two metal hooks and tabs are securely in
position.
1
metal hooks (2)
To replace the front mask and accent door, press them into position.
Small Desktop Computer
Follow the steps in the "Removing the Control Panel" procedure in the reverse order, ensuring that all tabs are secure.
Small Mini-Tower Computer
Follow the steps in the "Removing the Control Panel" procedure in the reverse order, ensuring that all tabs are secure.
