User Guide

Back to Contents Page

MEBx Defaults

The table below lists all the default settings for the Intel® Management Engine BIOS Extension (MEBx).

Password

admin

Intel ME Platform Configuration

Intel ME Platform State Control¹	Enabled * Disabled
Intel ME Firmware Local Update	Enabled * Disabled
Intel ME Features Control
Manageability Feature Selection	None Intel AMT * ASF
Intel ME Power Control
Intel ME ON in Host Sleep States	Mobile: ON in S0 * Mobile: ON in S0, S3/AC Mobile: ON in S0, S3/AC, S4-5/AC Mobile: ON in S0; ME WoL in S3/AC Mobile: ON in S0; ME WoL in S3/AC, S4-5/AC

Intel AMT Configuration Default Settings

Host Name
TCP/IP
DHCP Enabled. Disable?	N
Domain Name	blank²
Provision Model
Enterprise. Change to Small Business?	N
Setup and Configuration
Current Provisioning Mode	Provisioning Mode: PKI
Provisioning Record	Displays the provision PSK/PKI record data of the computer.
Provisioning Server
Provisioning Server Address	0.0.0.0
Port Number (0-65535)	0
TLS PSK
Set PID and PPS **	blank (format ABCD-1234)
Delete PID and PPS **
TLS PKI
Remote Configuration Enable/Disable **	Disabled
Manage Certificate Hashes	Five default hashes active
Set FQDN	blank
Set PKI DNS Suffix	blank
Un-Provision³
SOL/IDE-R
Username & Password	Disabled Enabled *
Serial Over LAN	Disabled Enabled *
IDE Redirection	Disabled Enabled *
Password Policy	Default Password Only * During Setup and Configuration Anytime
Secure Firmware Update	Disabled Enabled *
Set PRTC	blank
Idle Timeout
Timeout Value (0x0-0xFFFF)	1

*Default setting
**May cause Intel AMT partial unprovision
¹ Intel ME Platform State Control is only changed for Management Engine (ME) troubleshooting.
² In Enterprise mode, DHCP automatically loads the domain name.
³ Un-provision setting only seen if the box is provisioned.

Back to Contents Page