NOTE: If you ordered the optional internal card with Bluetooth wireless technology at the same time that you ordered your computer, the card is already installed.
Removing the Bluetooth Module
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Loosen the two captive screws on the modem/Mini PCI/wireless cover, then remove the cover and
set it aside.
1
modem/Mini PCI/wireless cover
2
captive screws (2)
Remove the M2 x 3-mm screw securing the Bluetooth module and set it aside.
1
Bluetooth module
2
M2 x 3-mm screw
Lift the Bluetooth module from its compartment.
Grasp the card and gently pull it apart from the connector cable.
NOTE: Do not disconnect the Bluetooth connector cable from the system board.
1
Bluetooth module
2
Bluetooth module connector
3
Bluetooth connector cable
Replacing the Bluetooth Module
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
