CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Remove the three M2.5 x 5-mm screws securing the fan to the base of the computer.
Disconnect the fan connector from the system board connector.
Lift the fan out of the computer.
1
fan
2
M2.5 x 5-mm screws (3)
3
fan connector
4
system board connector
Replacing the Fan
CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.